HOMEBREW
Power for the
transmitter S10K and the receiver E10K
| This power supply is designed for the German
transmitter S10K and receiver E10K. It delivers 720 Volt anode voltages for the transmitter and 350 Volt for the receiver. It also deliver 12.6 volt AC for heating. The transmitter is modified from 24 volt to 12 volt heating. |
All the capacitors and rectifiers are mounted on a glass fibre
board.
Here is the power in front of the S10K and E10K.
| 750 Volt DC output is for the S10K transmitter and
the 350 Volt DC out is for the E10K receiver. The 12.6 Volt AC output are for both S10K and E10K. The S10K have a 24 Volt heating voltage. I have modified my S10K to 12.6 Volt. A resistor in the oscillator must be removed. The output stage must be connected in parallel. |
BACK TO
LA6NCA HOMEBREW MAIN PAGE